Mica Powders and Resin Butterfly
Mixed Media Supplies Mica Powders Copper, Pearl, and Saphire
Gold PearlEx
Resin skins
Scissors
Glue (E6000)
I love to play with resin and especially the drippings that come off the original art piece. In this case, I have sparkly and shimmery metallic micas. Resin makes great embellishments for cards and scrapbook pages as it can lye flat. I used the mica powders with ArtResin as directed 1:1 stirring for the complete 4 minutes.
I used very little mica to color the resin for an entire 10x10 canvas board.
After I had let the resin cure for 12hrs I could then peel the resin off the parchment paper which was in place to catch all the drippings. I used these left over bendy resin skins to cut into the shape of butterfly wings. I then let cure another 24hrs and glued them to a drawer pull. The tail lifts up. I imagined this to be used as a zipper pull or hanging on a backpack.
Paint, Paper, Mixed Media, Stamps, Stencils, Clay, Mica Powders, Pigment Powders. Texture, Nature, and Color. A Mixed Media Playground.
Showing posts with label Metallic Mica Powders. Show all posts
Showing posts with label Metallic Mica Powders. Show all posts
21.8.18
30.4.18
Mixed Media Fathers Day Card



Supplies used today are:
Microbeads and Microflakes
Embossing Powder
Embossing Ink
Alcohol Markers
Distress Inks
Acrylic Skins
Cardstock
Good Monday Morning!
Today I made for you an early father's day card.
I started with some cardstock and a stencil from the Mixed Media Store.
I used embossing ink to smudge onto my stencil with cardstock underneath. I removed the stencil and I used brown embossing powder to stick to my image.
Then I heated the embossing powder with my heat tool.
Then I colored my background with distress inks pink/blue/brown.
I also used the Red Rubber Stamps found at Mixed Media Supplies Store.
If you look closely you can see I cut my stamps edges for a more organic finish.
I mounted my red rubber stamp onto an acrylic block with double sided tape. Then I randomly stamped across my background. I added some micro flakes and micro beads.
I used alcohol markers, acrylic skins, and metallic mica powders to color my image. This image can be found at Mixed Media Supplies Store!
I used double-sided foam tape to prop up the image.
That's it, I hope he likes it!
Have a great week and we will see you next time!
Warmly Peggy
Warmly Peggy
25.4.18
Floral Spring Hello
I'm so happy with the way this card turned out. It's simple and highlights a beautiful digital stamp from Mixed Media Supplies.
We celebrated Mom's 86th birthday this month. Alzheimer's isn't kind and we are getting to the point of having to introduce ourselves on occasion. Mom's favorite color is blue and her eyes twinkle a brilliant blue when she smiles. I hope this card will bring a smile and twinkle.
You'll need:
Bouquet digital stamp (Mixed Media Supplies) to be released shortly
Ornamental Frame (digital stash)
Sapphire Mica (Mixed Media Supplies)
Photo editing program (Photo Shop Elements)
Printing program (Print Shop), optional
Printer
Die Cutting machine (Sizzix eclips2) and associated software (eCal2)
Cardstock
Markers (Tombow)
Waterbrush
White embossing powder
heat gun
text background stamp
ink
watercolors
Water brush (#1 or #2)
Tape Runner (Tombow)
Quick dry Glue (LineCo Natural pH)
Embellishments (I used a laser woodcut)
Open your digital photo imaging program. Open the digital stamp and alter the color of the stamp lines by changing hue and saturation. Resize if needed and save. Repeat the process for the ornamental frame of your choice. I altered the frame slightly to accommodate the bouquet. Add the bouquet as an additional layer to the frame. Make any changes needed and save. I saved as a png and as a psd file just in case I wanted to make any additional changes in the future.
Since I'm wanting to make sure that the image will fit in the desired size for my card front and print one additional image, I opened Print Shop and set the page up using the guides for placement of the png image. Print the page when you are satisfied with the arrangement.
I let the ink on my print dry for about 24 hours before starting the watercolor background. I chose a light brown and watered it down significantly before adding it in a pouncing manner around the images on my print.
I used a light turquoise to color in the butterfly. Using a separate print, color the butterfly using a small amount of mica mixed with water. Let dry. Fussy cut the butterfly from the image and set aside.
Open eCal2 and create an oval frame with a cut out that is slightly larger than the outside diameter of the ornamental frame you are using. I added 1/4 inch to the measurements of my frame and created an oval with those measurements and added rectangle and used Back minus Front in the path dropdown to create my card front. Cut using your die cutting machine. (I didn't have a die that had a large enough opening for my image, so the electronic die cutting machine was my best option).
Using the background stamp and a light brown, stamp the oval frame, using some versamark ink, and a flourish stamp, stamp randomly around the frame. Liberally sprinkle the embossing powder to cover all the stamped areas. Remove the excess powder and using the heat gun, set the powder.
Using the eBrush, apply your color by spraying a light coat. Once you've sprayed the frame, gently wipe the excess color away from the embossed images on the frame.
If the mica you mixed with water earlier has dried on your palette, re-charge it with a little more water and using a fine tipped waterbrush and create small dots as desired around the embossed images. Let dry.
Adhere the digital print to the back of the oval frame. Adhere the frame and print (now one piece) to the card front. Using a dot of glue, adhere the butterfly and let dry. Lift the wings a bit for some dimension.
Glue any other embellishments as desired. I chose a "hello" woodcut from my stash. This piece could also be framed. It would make a very nice piece of home decor.
Thanks for dropping by and spending a little time on the MMS blog today. Hope you've scheduled some creative play in this week!
We celebrated Mom's 86th birthday this month. Alzheimer's isn't kind and we are getting to the point of having to introduce ourselves on occasion. Mom's favorite color is blue and her eyes twinkle a brilliant blue when she smiles. I hope this card will bring a smile and twinkle.
You'll need:
Bouquet digital stamp (Mixed Media Supplies) to be released shortly
Ornamental Frame (digital stash)
Sapphire Mica (Mixed Media Supplies)
Photo editing program (Photo Shop Elements)
Printing program (Print Shop), optional
Printer
Die Cutting machine (Sizzix eclips2) and associated software (eCal2)
Cardstock
Markers (Tombow)
Waterbrush
White embossing powder
heat gun
text background stamp
ink
watercolors
Water brush (#1 or #2)
Tape Runner (Tombow)
Quick dry Glue (LineCo Natural pH)
Embellishments (I used a laser woodcut)
Open your digital photo imaging program. Open the digital stamp and alter the color of the stamp lines by changing hue and saturation. Resize if needed and save. Repeat the process for the ornamental frame of your choice. I altered the frame slightly to accommodate the bouquet. Add the bouquet as an additional layer to the frame. Make any changes needed and save. I saved as a png and as a psd file just in case I wanted to make any additional changes in the future.
Since I'm wanting to make sure that the image will fit in the desired size for my card front and print one additional image, I opened Print Shop and set the page up using the guides for placement of the png image. Print the page when you are satisfied with the arrangement.
I let the ink on my print dry for about 24 hours before starting the watercolor background. I chose a light brown and watered it down significantly before adding it in a pouncing manner around the images on my print.
I used a light turquoise to color in the butterfly. Using a separate print, color the butterfly using a small amount of mica mixed with water. Let dry. Fussy cut the butterfly from the image and set aside.
Open eCal2 and create an oval frame with a cut out that is slightly larger than the outside diameter of the ornamental frame you are using. I added 1/4 inch to the measurements of my frame and created an oval with those measurements and added rectangle and used Back minus Front in the path dropdown to create my card front. Cut using your die cutting machine. (I didn't have a die that had a large enough opening for my image, so the electronic die cutting machine was my best option).
Using the background stamp and a light brown, stamp the oval frame, using some versamark ink, and a flourish stamp, stamp randomly around the frame. Liberally sprinkle the embossing powder to cover all the stamped areas. Remove the excess powder and using the heat gun, set the powder.
Using the eBrush, apply your color by spraying a light coat. Once you've sprayed the frame, gently wipe the excess color away from the embossed images on the frame.
If the mica you mixed with water earlier has dried on your palette, re-charge it with a little more water and using a fine tipped waterbrush and create small dots as desired around the embossed images. Let dry.
Adhere the digital print to the back of the oval frame. Adhere the frame and print (now one piece) to the card front. Using a dot of glue, adhere the butterfly and let dry. Lift the wings a bit for some dimension.
Glue any other embellishments as desired. I chose a "hello" woodcut from my stash. This piece could also be framed. It would make a very nice piece of home decor.
Thanks for dropping by and spending a little time on the MMS blog today. Hope you've scheduled some creative play in this week!
3.1.18
Terra Cotta Textured Pendant
Hi everyone! I'm so excited about sharing my first first project of 2018 with you! For this project, I'm using oven bake clay, a Mixed Media Supplies Background Texture stamp and Mica Powder also from Mixed Media Supplies.
You'll need:
Oven Bake Clay (such as Sculpey III)
Diamond Fence Background Stamp (Mixed Media Supplies)
Bronze Mica Powder (Mixed Media Supplies)
Mod Podge (Matte)
shape die
craft knife
wire
bead
wire cutters
needle nose pliers
Essential Oil (optional)
Watch the video below for a quick review.
Additional details can be found on my blog. Stay tuned here on the MIxed Media blog... looks like January 2018 is going to be a fabulous month for crafting!
18.12.17
Joy to the World - a little mixed media ornament
This mixed media oversized "ornament" was fun so let's get started!
You'll need:
Cardboard coaster (4 x 4 inches)
White paint
texture paste
Thick Vertical Distress Background Stamp
Sapphire Blue Mica Powder
digital paper print
JOY diecut (I created my own using fonts and basic shapes)
electronic die cutting machine and software
clear glaze
Mod Podge
palette knife
foam brush
ribbon
beads, t-pins
wire cutters
hot glue gun
3/8 " hole punch
snowflake button
Xyron - permanent adhesive
Micron .01 black pen
Cut the JOY with your electronic cutting machine. I cut 4 and then cut 5 additional snowflakes. Using the Xyron, apply adhesive to all but one of the JOY cuts and to all but 2 of the extra snowflake cuts. Stack the JOY cuts. If desired, edge the letters with a little light brown to "antique" it and then using some clear glaze and a bit of the mica powder, paint the snow flake. Let dry. With the snowflakes, make one stack 3 cuts deep and a second 2 cuts deep. Paint them with the glaze and mica mixture. Set aside to dry.
Prep the coaster by spreading a coat of paint using a palette knife. Let dry.
Apply a light coat of the texture paste on the coaster. While still wet, stamp the paste with the background stamp. My paste was a little too wet and thick, but the texture I got was just as I'd hoped. Wash your stamp as quickly as possible. Let the paste dry.
Tear a strip of the digital printed paper and apply to the painted coaster on the right side with some mod podge. Let dry. If you need to, trim the edges and sand lightly. You can apply another coat of paint and "white wash" the digital paper. Mine definitely needed to be toned down a bit. Let dry.
Apply a light coat of glue to the back of the JOY cutout and adhere to the coaster. Now, glue the snowflake (stack of 3) to the front of the snowflake. Let the glue set. I wanted the uppermost stack to pop out a little more, so I used some pop-up dots on the back. Glue the button to the front using some hot glue.
If desired, use a micron pen to write to the world under the JOY cutout.
Punch two holes at the top of the coaster as shown in the image above.
Create two bead dangles and thread them onto the ribbon. Thread the ribbon through one of the hole going front to back and tie in place. Trim the ends if needed. Thread the other end of the ribbon, going front to back making sure your ribbon isn't twisted and tie off.
Your new mixed media ornament is ready to hang or gift to a special friend.
Hope you have some crafting time planned in the days to come.... and stay tuned to the Mixed Media blog for more fun ideas the rest of this week. Merry Christmas everyone!
4.12.17
Clay, stamps and Mica for the holidays
We decided it was time to do a little sprucing up and deck the trees in something new this year. I've been wanting to play with "clay" again for a while and this was a perfect time to get it out, grab a background stamp from Mixed Media Supplies, a bit of Alcohol ink and a few other tools. Let's get started!
You'll need:
Clay (Sculpey III)
Liquid Clay
Crackle Background stamp (Mixed Media Supplies)
Pearl Mica (Mixed Media Supplies)
Alcohol Ink
water brushes
Piercing Tool
clay blade
pasta machine or clay roller
Pattern
Wire, wire cutters, needle nose pliers (optional)
Ribbon (optional)
Condition the clay according to the manufacturer's directions. I use a pasta machine to make sure I have a uniform thickness.
Draw a pattern if desired and cut the clay using the blade.
At this time, I "stamped" the background lightly to get some texture on the clay pieces that I wanted to add texture too. Using the Liquid Clay, adhere the pieces to the base. Add any additional details you'd like.
Since I made a gnome, I wanted to add a little more texture to the beards... you can use a stamp, your fingers or any other tools you desire.
Once the piece is assembled, pierce a hole in the top of the hat and place the assembled piece on a some foil or parchment on a baking sheet. Preheat the oven to 275 and bake 15 minutes for every 1/4 inch of thickness. My oven is a little lower in temps, so I baked for 20 minutes.
Let cool completely.
Choose your base color and paint on the base as desired. Let dry. Paint the face and nose. Paint the beard. in a paint pot, mix some mica with some water. Paint it on as desired for a little more sheen and highlight. Let dry. Add a hanger. I used some jewelry wire to make a hanger. You could use ribbon if desired.
That's it for the Gnomes that will be going on the tree....
Stay tuned, there's more on tap this month from the team! You won't want to miss out! So visit often.
You'll need:
Clay (Sculpey III)
Liquid Clay
Crackle Background stamp (Mixed Media Supplies)
Pearl Mica (Mixed Media Supplies)
Alcohol Ink
water brushes
Piercing Tool
clay blade
pasta machine or clay roller
Pattern
Wire, wire cutters, needle nose pliers (optional)
Ribbon (optional)
Condition the clay according to the manufacturer's directions. I use a pasta machine to make sure I have a uniform thickness.
Draw a pattern if desired and cut the clay using the blade.
At this time, I "stamped" the background lightly to get some texture on the clay pieces that I wanted to add texture too. Using the Liquid Clay, adhere the pieces to the base. Add any additional details you'd like.
Since I made a gnome, I wanted to add a little more texture to the beards... you can use a stamp, your fingers or any other tools you desire.
Once the piece is assembled, pierce a hole in the top of the hat and place the assembled piece on a some foil or parchment on a baking sheet. Preheat the oven to 275 and bake 15 minutes for every 1/4 inch of thickness. My oven is a little lower in temps, so I baked for 20 minutes.
Let cool completely.
Choose your base color and paint on the base as desired. Let dry. Paint the face and nose. Paint the beard. in a paint pot, mix some mica with some water. Paint it on as desired for a little more sheen and highlight. Let dry. Add a hanger. I used some jewelry wire to make a hanger. You could use ribbon if desired.
That's it for the Gnomes that will be going on the tree....
Stay tuned, there's more on tap this month from the team! You won't want to miss out! So visit often.
3.11.17
Cluttered Mind ATC
I love ATC's. They are fun, compact and can be used to experiment on techniques in a smaller way. I have, like many others a bunch going on. My mind is cluttered and so is my ATC! It is a way to release some stress and have some fun doing it. Mixed Media Supplies has so many goodies to help me express myself.
I used Mica powder mixed in molding past for the textured
Supplies:
Playing Card
Digital Image sheets from http://www.mixedmediasupplies.com/
Molding Paste
Gesso
Embossing stamp pad
Rubber Stamp Chainlink Fence
Airbrush Marker Machine/Stampin Up/Tim Holtz tool as well
Spectrum Noir Markers
Sharpie Gold marker
Glitter
I started with a regular playing card. I have stacks of them. I primed it with white gesso.
Next, I trimmed several of the digital image sheets available from Mixed Media Supplies.
I began to fill the background with color. I used an airbrush marker tool to do so. I also have on hand Spectrum Noir Markers.
I used stencils that I had on hand to put in some additional elements in my composition.
I used colored pencils to fill in some of my collage images for my ATC.
It is a very rewarding and relaxing time spent in crafting!
Ready to put all of the elements together!
areas. I also used it in the Embossing stamp area along with some glitter. I really enjoy the completed
card.
23.10.17
Mixed Media Fun - Part 2
I wanted to make a statement piece for my print. I decided to see what I could accomplish with two frames from DollarTree.
I used a similar paint combination to paint my frame.
After painting the base coloring I used some mixed with Dimensional Magic by Mod Podge mixed with Saphire and then Copper Metallic Mica powder.
While drying the frame I took the glass and using a stencil I used gold, copper and silver sharpies on the back glass of my project.
I added more Mica powder and then framed the print from last week's post.
I was hoping to achieve a light and airy background and frame for my print. I would love to have feedback from all on this piece. Thank you,
Debi
Subscribe to:
Posts (Atom)








































